Wednesday, November 13, 2013

DIY Faux Stained Glass (using Mod Podge and Fabric paint)

Around this time last year, I made myself a lovely faux stained glass panel out of an old frame, Elmers glue, and craft paint.  Sadly, that panel broke a couple of months ago.  I thought it was high time that I made another one, but this time I experimented with 3D fabric paint, Mod Podge, and acrylic paint.   After everything dried, I was surprised by how nice the panel turned out!  Here are the results of my little experiment: 

Tee hee hee.  Do you see bald men sitting in chairs.... or ladies with large hairdos?  They're supposed to be ladies... and I find them hilarious!  (I can't take credit for the design though.  It came right from this pinned image.)  Right now this modern and quirky stained glass panel sits inside Chuck's room and I always supress a giggle whenever I see their round glasses looking at me.

Wanna try making your own faux stained glass panel?  Read on!

Materials:
  • Picture frame
  • Three dimensional black fabric paint
  • Mod Podge (I used Matte)
  • Craft Paint 
  • Paint brush
  • Muffin Tin (or artist's palette)
  • Pen
  • Paper
  • Optional:  Clear tape, glass cleaner

Directions: 



1.  Pull out the sheet inside of your frame and trace it onto a piece of paper.  (Alternatively, you could also trace the glass or back panel of the frame.)  Cut out your rectangle and draw a design on it.

2.  Clean the glass of your picture frame.



3.  Place the glass on top of your sketch.  Then, use your fabric paint to trace the black "lead" of your stained glass panel.



4.  Once your "lead" dries, turn your glass over so that the lead is on the bottom.  Place your glass panel on top of a sheet of clean, white paper.  Now you're going to paint the colored portions on the back of your glass. (I chose to do it this way so that I wouldn't have to worry about painting over my black lines.)  Create the colored portions by mixing together approximately 1 teaspoon of Mod Podge and 2-3 drops of craft paint.  Mix both together well.  Then, paint the back of your glass panel with the different colors.   



5.  Once your colored paint dries, place your glass back into your frame and secure it.  (I used a couple of pieces of clear tape to make sure the panel stayed put.)   Remember that the front of your stained glass has the fabric paint on it and the back of your stained glass has the colored Mod Podge on it  Also, make sure that you do not scratch the glass panel because the Mod Podge and fabric paint will scrape off.  


And that's it!  Make one of these babies for yourself... or better yet, get your kids to make one as holiday a gift for someone they love.  Happy crafting!