Hope you have a wonderful weekend.
Friday, February 22, 2013
Thursday, February 21, 2013
Making Styrofoam stamps
Hello there!
I'm on a crapting roll, so I figured I'd upload two posts today.
As you can see, I'm still working on my greeting card designs for the upcoming craft show. Here's my newest attempt at crapting stamps:
These are the materials that I used:
- Scissors
- Craft knife
- Pencil
- Tacky glue
- Cardboard
- Styrofoam (I used one that originally held ground beef-- I know... gross when you think about it, but I promise I washed it really well)
To make these crapty beauties, I used a pencil to sketch out my designs onto the Styrofoam. Then, I used my scissors and craft knife to cut out the different pieces. Then, I used tacky glue to attach them to pieces of cardboard. Once the Styrofoam was stuck on tight, I trimmed the cardboard so that it was slightly bigger than my stamp.
Instead of making a sponge ink pad, this time I used a paintbrush and painted a thin layer of craft paint onto each stamp before each use. Here are my results:
These stamps were fun to crapt... and I feel like I'm moving in the right direction... but I definitely have a ways to go if I want to make cards that are good enough to sell.
So currently I'm going back to the drawing board and channeling the mantra of Chuck's favorite book character: "I think I can, I think I can, I think I can..."
I'm on a crapting roll, so I figured I'd upload two posts today.
As you can see, I'm still working on my greeting card designs for the upcoming craft show. Here's my newest attempt at crapting stamps:
These are the materials that I used:
- Scissors
- Craft knife
- Pencil
- Tacky glue
- Cardboard
- Styrofoam (I used one that originally held ground beef-- I know... gross when you think about it, but I promise I washed it really well)
To make these crapty beauties, I used a pencil to sketch out my designs onto the Styrofoam. Then, I used my scissors and craft knife to cut out the different pieces. Then, I used tacky glue to attach them to pieces of cardboard. Once the Styrofoam was stuck on tight, I trimmed the cardboard so that it was slightly bigger than my stamp.
Instead of making a sponge ink pad, this time I used a paintbrush and painted a thin layer of craft paint onto each stamp before each use. Here are my results:
| Look! My lettering came out the right way. Hooray! |
These stamps were fun to crapt... and I feel like I'm moving in the right direction... but I definitely have a ways to go if I want to make cards that are good enough to sell.
So currently I'm going back to the drawing board and channeling the mantra of Chuck's favorite book character: "I think I can, I think I can, I think I can..."
Making potato stamps
Remember when I shared with you that my one word for this year was going to be "try"? Do you remember me saying that I would push myself to try new things... even when they seemed a bit frightening?
Well, guess what? *Gulp* I've definitely been trying some new things out. .. and this post describes one of those things.
(You're probably wondering, "What? Making potato stamps frightens you? Girl, you gotta get out more...")
Oh no, no, no. Let me back up. A couple of months ago my aunt and I signed up to sell crafts at a craft fair. *Gulp* To any seasoned crafter, this would be no big deal. You craft a bunch of stuff and then you sell it. No biggie, right?
Ha! It's a biggie because first you have to make a whole bunch of inventory...and second you gotta make sure your inventory is good enough to sell.
I signed up to sell greeting cards. After reading Elisabeth Harden's kid's book on printing, I think I'm going to try stamping original designs onto my cards. So I've been playing around with printing. Here's my first attempt at making stamps out of potatoes:
Oh yeah, here are three big things I learned in the process: (1) Unless you're Leonardo DaVinci, you should write your word stamps backwards. No one wants to read mirror image writing. (2) Always put a smock on Chuck. (Craft paint comes out in the wash, right?) (3) I need to ditch the sponge ink pad and possibly get a craft roller... hmm...
Oh well. That's what happens when you try new things. Now... onto our next printing adventure! (Hopefully I'll figure out something before the big craft show... eekers!)
Tuesday, February 19, 2013
Make a bubble snake
We don't drink much soda so when hubby finally brought a Pepsi home I snatched up his empty bottle quicker than a hungry child grabbing at freshly baked Christmas cookies.
Why? Well, I had been dying to make a bubble snake blower. And honestly, could you blame me? Look at the long foamy chain of bubbles I was able to blow.
To blow awesome foamy snake-like bubble chains, I just needed a couple of materials:
Materials:
- empty plastic bottle
- wash cloth
- scissors
- rubber band
- dish detergent
- water
- plastic container
Directions:
1. Cut off the bottom of the bottle.
2. Cut a circle out of the wash cloth that's about 1-2 inches larger than the bottom of the bottle.
3. Use a rubber band to attach your washcloth circle to the bottle. That's it!
4. Dip the bottle (wash cloth bottom) into dish detergent that's been mixed with a bit of water.
5. Blow. A foamy bubble snake will appear before your eyes.
(Warning: Do not inhale, only exhale. Otherwise you'll end up drinking dish detergent like I did. Yuck.)
Here are some photos of Baby Chuck and I playing with our bubble snake blower. (You may be wondering why we're in the bath tub. Or why my bathtub is so dirty.... Hmm.. Well, we fully intended to blow bubbles outside, but it was just too cold. The bath tub served as a nice place to try the activity out, since the bubbles created quite a sticky mess on the ground. As for why my bathtub is so dirty... I've neglected to clean it.... eek.)

Let me know if you try this out with your kids. I can't wait till the weather gets warmer. We'll definitely try blowing more bubble snakes outside.
Why? Well, I had been dying to make a bubble snake blower. And honestly, could you blame me? Look at the long foamy chain of bubbles I was able to blow.
| Wowzers. This photo makes my inner child squeal with delight |
To blow awesome foamy snake-like bubble chains, I just needed a couple of materials:
Materials:
- empty plastic bottle
- wash cloth
- scissors
- rubber band
- dish detergent
- water
- plastic container
Directions:
1. Cut off the bottom of the bottle.
2. Cut a circle out of the wash cloth that's about 1-2 inches larger than the bottom of the bottle.
3. Use a rubber band to attach your washcloth circle to the bottle. That's it!
4. Dip the bottle (wash cloth bottom) into dish detergent that's been mixed with a bit of water.
5. Blow. A foamy bubble snake will appear before your eyes.
(Warning: Do not inhale, only exhale. Otherwise you'll end up drinking dish detergent like I did. Yuck.)
Here are some photos of Baby Chuck and I playing with our bubble snake blower. (You may be wondering why we're in the bath tub. Or why my bathtub is so dirty.... Hmm.. Well, we fully intended to blow bubbles outside, but it was just too cold. The bath tub served as a nice place to try the activity out, since the bubbles created quite a sticky mess on the ground. As for why my bathtub is so dirty... I've neglected to clean it.... eek.)
Make you own toast stampers (Three ways to write on toast)
One of my favorite things to eat is toast. I love feeling its rough texture on the roof of my mouth. I love the satisfying crunch that comes with each bite. And I love pairing it with sweet jam and melted butter.
Yum. Yum. Yum.
I'd eat toast every day if I could, but since Baby Chuck is allergic to wheat, I haven't eaten real bread in a long time. Last weekend I had a strong hankering for toast, so while Baby Chuck slept I sneakily made some for myself and hubby.
It was delicious!
But of course, I couldn't just leave it at that. I had another "I wonder if... " moment. This time I wondered if I could write messages or draw images on my toast. Here are three methods that I came up with:
(Note: I realize that cookie cutters would have worked too.... but I don't own any.... so necessity bred invention)
Method 1: Use a chopstick
Method 2: Make an aluminum foil shape
I rolled a piece of aluminum foil into a snake-like shape. Then, I bent the foil into my desired shape (heart). I pressed my heart down into the bread. This time, instead of removing the heart shape and broiling the bread, I left the foil on the bread as I placed it under the broiler. Once my bread toasted, I pulled it out of the oven and removed my foil shape. Voila! A much cleaner heart image emerged. The aluminum foil protected that portion of the bread from getting toasted. (Note: I don't recommend leaving the aluminum foil shape on your bread if you use a toaster.)
Method 3: Crapt a cardboard toast stamper
Step 1: Trace the shape of your bread and your desired stamp shape onto a piece of cardboard. (If the thought of your bread touching recycled cardboard grosses you out, you could always trace your bread onto a piece of paper towel first, cut that bread shape out, and then tracing that shape onto a piece of cardboard.)
Step 2: Trace and cut out three more cardboard copies of your desired shape. (So all in all I cut out 4 identical hearts out of cardboard. My bread was pretty thick, so I needed my stamp to be pretty thick too.)
Step 3: Cover one side of your bread shape with aluminum foil. Tape together your four identical shapes and then cover them with aluminum foil too. (If you don't mind having cardboard touch your food, you could always skip this step.)
Step 4: Tape your stamp shape onto your bread shape. Give yourself a pat on the back because you made a toast stamper.
To use the stamper, match it up to your slice of bread and push down. Make sure your shape is deeply imprinted on the bread. Place your bread under the broiler (or in toaster) and toast away!
Let me know if you try making these toast stampers. I'd love to see what your toast looks like.
Yum. Yum. Yum.
I'd eat toast every day if I could, but since Baby Chuck is allergic to wheat, I haven't eaten real bread in a long time. Last weekend I had a strong hankering for toast, so while Baby Chuck slept I sneakily made some for myself and hubby.
It was delicious!
But of course, I couldn't just leave it at that. I had another "I wonder if... " moment. This time I wondered if I could write messages or draw images on my toast. Here are three methods that I came up with:
(Note: I realize that cookie cutters would have worked too.... but I don't own any.... so necessity bred invention)
Method 1: Use a chopstick
I simply took a chopstick and drew on my toast. I made sure to press down hard enough to get a clear indentation in the bread, without ripping through it. Then, I placed the bread under the broiler. (We don't own a toaster... but I think using a toaster should work too). Once my bread browned enough, I quickly pulled the toast out. Voila! Most of the bread turned darker brown while my indented image remained white. Easie-peasie.
Method 2: Make an aluminum foil shape
I rolled a piece of aluminum foil into a snake-like shape. Then, I bent the foil into my desired shape (heart). I pressed my heart down into the bread. This time, instead of removing the heart shape and broiling the bread, I left the foil on the bread as I placed it under the broiler. Once my bread toasted, I pulled it out of the oven and removed my foil shape. Voila! A much cleaner heart image emerged. The aluminum foil protected that portion of the bread from getting toasted. (Note: I don't recommend leaving the aluminum foil shape on your bread if you use a toaster.)
Method 3: Crapt a cardboard toast stamper
Step 1: Trace the shape of your bread and your desired stamp shape onto a piece of cardboard. (If the thought of your bread touching recycled cardboard grosses you out, you could always trace your bread onto a piece of paper towel first, cut that bread shape out, and then tracing that shape onto a piece of cardboard.)
Step 2: Trace and cut out three more cardboard copies of your desired shape. (So all in all I cut out 4 identical hearts out of cardboard. My bread was pretty thick, so I needed my stamp to be pretty thick too.)
Step 3: Cover one side of your bread shape with aluminum foil. Tape together your four identical shapes and then cover them with aluminum foil too. (If you don't mind having cardboard touch your food, you could always skip this step.)
Step 4: Tape your stamp shape onto your bread shape. Give yourself a pat on the back because you made a toast stamper.
To use the stamper, match it up to your slice of bread and push down. Make sure your shape is deeply imprinted on the bread. Place your bread under the broiler (or in toaster) and toast away!
Let me know if you try making these toast stampers. I'd love to see what your toast looks like.
Sunday, February 17, 2013
Make glow in the dark paint (using glow sticks)
Have you ever had one of those "I wonder if..." moments? A couple of nights ago hubby and I opened a canister of glow sticks to play around with them and take photos.
In the midst of playing, I found myself wondering if I could use their lovely glowing innards to make glow in the dark paint. Now, the label on the glow stick canister clearly said that we shouldn't "puncture" the tubes... but it also said that the glow sticks were nontoxic. So... I figured that as long as we didn't let the paint touch our skin, eyes, or clothes we should be ok. Here's what my glow in the dark painting looked like:
Update 5/29/13- Several concerned readers brought up valuable points regarding possibly dangerous chemicals and glass inside the tubes. Be sure to read the comments below and think twice before attempting this activity...
Materials:
- Scissors
- Disposable container (to hold paint)
- Paint brush
- Paper towel
- Newspaper
- Gloves
- Corn starch
Directions:
1. Cover your area with newspaper and wear gloves (I didn't do this... but looking back I think it would be a good idea since you are working with chemicals.)
2. Crack your glow stick so that the entire stick glows
3. Open up your glow stick. To do this, I held the glow stick vertically over my disposable container. I cut the top bottom end of the glow stick. The liquid inside didn't flow out very quickly. So, I turned the glow stick upside down (so that the cut end was now on top and the uncut end was on the bottom). Then, I cut the bottom uncut end. (We cut it this way so that the tip wouldn't go flying in the air. Plus, the liquid flowed much quicker if both ends were cut.)
3. I added a bit of corn starch to the glowing liquid to thicken up the paint.
4. Use your paint to paint pieces of paper towel placed over newspapers.
Now, I'm sure you already could guess this... but sadly the images don't glow forever. So enjoy their beauty while they last.
Oh yeah- here are some other photos of our glow stick play:

In the midst of playing, I found myself wondering if I could use their lovely glowing innards to make glow in the dark paint. Now, the label on the glow stick canister clearly said that we shouldn't "puncture" the tubes... but it also said that the glow sticks were nontoxic. So... I figured that as long as we didn't let the paint touch our skin, eyes, or clothes we should be ok. Here's what my glow in the dark painting looked like:
Update 5/29/13- Several concerned readers brought up valuable points regarding possibly dangerous chemicals and glass inside the tubes. Be sure to read the comments below and think twice before attempting this activity...
Materials:
- Scissors
- Disposable container (to hold paint)
- Paint brush
- Paper towel
- Newspaper
- Gloves
- Corn starch
Directions:
1. Cover your area with newspaper and wear gloves (I didn't do this... but looking back I think it would be a good idea since you are working with chemicals.)
2. Crack your glow stick so that the entire stick glows
3. Open up your glow stick. To do this, I held the glow stick vertically over my disposable container. I cut the top bottom end of the glow stick. The liquid inside didn't flow out very quickly. So, I turned the glow stick upside down (so that the cut end was now on top and the uncut end was on the bottom). Then, I cut the bottom uncut end. (We cut it this way so that the tip wouldn't go flying in the air. Plus, the liquid flowed much quicker if both ends were cut.)
3. I added a bit of corn starch to the glowing liquid to thicken up the paint.
4. Use your paint to paint pieces of paper towel placed over newspapers.
Now, I'm sure you already could guess this... but sadly the images don't glow forever. So enjoy their beauty while they last.
Oh yeah- here are some other photos of our glow stick play:
Friday, February 15, 2013
Valentine's Day
I hope you had a good Valentine's day.
We celebrated with a party at the library and a quiet dinner at home.
Thursday, February 14, 2013
Chinese New Year
Happy Valentine's Day!
I know, Chinese New Year was last week and today is Valentine's Day. But, I just wanted to post these photos because hubby, Chuck, and I celebrated the New Year with family members that we love very much. (And isn't love what today is all about?).
Hope you have a wonderful day enjoying the company of loved ones.
(I didn't have my camera on me, so special thanks to Esther for taking these photos on her i-product.)
I know, Chinese New Year was last week and today is Valentine's Day. But, I just wanted to post these photos because hubby, Chuck, and I celebrated the New Year with family members that we love very much. (And isn't love what today is all about?).
Hope you have a wonderful day enjoying the company of loved ones.
(I didn't have my camera on me, so special thanks to Esther for taking these photos on her i-product.)
Wednesday, February 13, 2013
Make Eggshell dolls
During a recent trip to our library, I found a couple of old craft books showing how to create dolls from eggshells. I'd never seen this type of craft before, so I was super excited to try it out.
If you're like me, you have a thing for Matryoshka dolls... and fairy tales. (Random tangent time: As a kid I used to read tons and tons of fairy tales. Magical powers? Fairies? Elves? Yup. Yup. Yup. I loved it all. This love for fairy tales ended up morphing into a love of science fiction and fantasy novels later on... but I digress.)
If you're like me, you have a thing for Matryoshka dolls... and fairy tales. (Random tangent time: As a kid I used to read tons and tons of fairy tales. Magical powers? Fairies? Elves? Yup. Yup. Yup. I loved it all. This love for fairy tales ended up morphing into a love of science fiction and fantasy novels later on... but I digress.)
Here are my results:
Make Eggshell Dolls
I had fun making them... but I had way more fun decorating them. In my opinion, painting cute things is the best part about crafting.
If you'd like to make your own eggshell dolls, read on!
Tuesday, February 12, 2013
DIY Cardboard Whale Tissue Box Holder
Once again, I fell in love with something that I saw on Etsy: a whale tissue box holder. Although he was super cute, I couldn't justify spending the money. So... I crapted my own.
Would you like to make your own whale tissue holder? If so, read on!
Materials:
- Pen
- Ruler
- Exacto knife
- Scissors
- Tacky glue (I used Aleene's)
- Packing tape
- Paint
- Paint brushes
- Mod Podge
- Foam brush
- Cardboard (<-- Crap!)
Directions:
1. Measure and cut out
- 2 pieces of rectangular cardboard, 3 3/4 inches x 9 1/2 inches
- 2 pieces of rectangular cardboard, 3 3/4 inches x 5 inches
3. Glue your four rectangular pieces together to create the sides of your tissue box holder. (I used tacky glue and packing tape to securely attach the pieces together.) Then, slide the whale tale in and tape it down as well.
4. Measure the top of your creation and cut out another rectangular piece of cardboard to place on top. Cut out a rectangle where your tissues usually come out.
(I made my top rectangle 5 inches by 9 1/2 inches. It was slightly too narrow, but I used it anyway because I ran out of cardboard.)
5. Paint your box. Then, give it a couple of coats of Mod Podge to protect your paint job.
Enjoy!
Would you like to make your own whale tissue holder? If so, read on!
Materials:
- Pen
- Ruler
- Exacto knife
- Scissors
- Tacky glue (I used Aleene's)
- Packing tape
- Paint
- Paint brushes
- Mod Podge
- Foam brush
- Cardboard (<-- Crap!)
Directions:
1. Measure and cut out
- 2 pieces of rectangular cardboard, 3 3/4 inches x 9 1/2 inches
- 2 pieces of rectangular cardboard, 3 3/4 inches x 5 inches
2. Cut out the shape of a whale tail from a piece of cardboard. Cut out a small slit at the end of your tail. Cut out a similar slit in the center of one of your smaller cardboard pieces. Make sure the tail slides snugly into the rectangle.
3. Glue your four rectangular pieces together to create the sides of your tissue box holder. (I used tacky glue and packing tape to securely attach the pieces together.) Then, slide the whale tale in and tape it down as well.
4. Measure the top of your creation and cut out another rectangular piece of cardboard to place on top. Cut out a rectangle where your tissues usually come out.
(I made my top rectangle 5 inches by 9 1/2 inches. It was slightly too narrow, but I used it anyway because I ran out of cardboard.)
5. Paint your box. Then, give it a couple of coats of Mod Podge to protect your paint job.
Enjoy!
Little Masseuse
Baby Chuck heard that Nana liked getting massages, so he's practicing for when she visits us this April.
0202131323 from Pink Stripey Socks on Vimeo.
0202131323 from Pink Stripey Socks on Vimeo.
Monday, February 11, 2013
Anti-acne Honey and Cinnamon mask
Dear Acne,
Consider this mask my anti-Valentine.
Please don't be mine.
No love,
Leslie
Once again, I was inspired by beauty guru Michelle Phan. (To watch her video, click here.) She made a warm mask made from honey and cinnamon that I had to try. Apparently honey has antibacterial properties and cinnamon stops bacterial growth... so I thought this mask would help get rid of my stubborn acne. (Boo bad skin!)
Ingredients:
- 3 T honey
- 1 T cinnamon
Directions:
1. Mix honey and cinnamon together.
2. Place mixture in the microwave for 20 seconds. When warmed, it resembles melted chocolate.
3. Use a pastry brush to paint it on your face. (Or, just dab it on with your fingers.) Wait 10 minutes. (Watch out! The mixture will drip.) Rinse it off. (Note: Don't rub your face too much while you rinse. Otherwise the cinnamon scratches you quite a bit.)
Does it work? Well, it's now been a week since I've tried the mask and sadly I haven't seen much improvement. Boo! However, I did enjoy trying the mask out. It felt lovely and warm on my face, so I felt like I was having a spa experience right at home.
Have a great Monday!
Saturday, February 9, 2013
Thursday, February 7, 2013
DIY Eggshell Sidewalk Chalk
Yes. You read the title correctly. Last week I tried making sidewalk chalk out of eggshells... and it worked! Here's the proof:
DIY Eggshell Sidewalk Chalk
This post contains affiliate links. Thank you for your support!
DIY Band- Aid heart nail stencil
I may not look like a girly girl on the outside.
I don't wear makeup.
My daily outfit usually consists of a pair of jeans and purple Converses.
My hair is usually in a ponytail or messy bun because I haven't gotten a haircut in over a year.
But here's a little secret- I'm a bonafide girly girl on the inside.
I dream of wearing sparkly shoes, bright red lipstick, and lovely polka dot vintage dresses with peter pan collars. I'm also an unabashed fan of YouTube beauty gurus. I could spend hours watching them talk about beauty and fashion products.
Strange right? Hopefully one day I can figure out how to balance out my inner girly girl with my outer plain jane.
Anyway, I just brought this up because I wanted to show you a neat trick that I learned from the mega talented Michelle Phan. Did you know that you can use band aids as nail stencils? (Click here to watch her tutorial.)
Directions:
1. Cut off the two end bits from the band aid. Toss out the middle white pad.
2. Fold each end bit in half and cut out a tiny heart. Make sure the heart is smaller than your nail. (This was surprisingly hard for me to do. I had to cut up a lot of Band-Aids to get two hearts small enough to fit my large thumbs.)
3. Stick the Band-Aid to your nail and rub it to make sure that it's stuck on tight.
4. Paint over the heart.
5. Take a deep breath and quickly rip the band aid off.
Voila! Enjoy your hearts.
I don't wear makeup.
My daily outfit usually consists of a pair of jeans and purple Converses.
My hair is usually in a ponytail or messy bun because I haven't gotten a haircut in over a year.
But here's a little secret- I'm a bonafide girly girl on the inside.
I dream of wearing sparkly shoes, bright red lipstick, and lovely polka dot vintage dresses with peter pan collars. I'm also an unabashed fan of YouTube beauty gurus. I could spend hours watching them talk about beauty and fashion products.
Strange right? Hopefully one day I can figure out how to balance out my inner girly girl with my outer plain jane.
Anyway, I just brought this up because I wanted to show you a neat trick that I learned from the mega talented Michelle Phan. Did you know that you can use band aids as nail stencils? (Click here to watch her tutorial.)
Directions:
1. Cut off the two end bits from the band aid. Toss out the middle white pad.
2. Fold each end bit in half and cut out a tiny heart. Make sure the heart is smaller than your nail. (This was surprisingly hard for me to do. I had to cut up a lot of Band-Aids to get two hearts small enough to fit my large thumbs.)
3. Stick the Band-Aid to your nail and rub it to make sure that it's stuck on tight.
4. Paint over the heart.
5. Take a deep breath and quickly rip the band aid off.
Voila! Enjoy your hearts.
Tuesday, February 5, 2013
Make marbled paper with shaving cream
Look at what Baby Chuck and I made the other day:
If you'd like to make your own marbled paper, keep reading: (Original recipe found here)
Materials:
- baking tray
- heavier weight paper (we used watercolor paper, but I think card stock would be good too)
- craft paint (or maybe food coloring would work too?)
- shaving cream (white foam kind)
- old towel
- ruler/ unused credit card
Directions:
1. Prep your area and child. Decide where you want to do the activity. Set up the materials beforehand. Cover your work area with something to protect it. Decide where you want to place the papers to dry. Place a towel near you so that you can easily wipe your hands. Place your ruler / unused credit card near you for easy access. (This is a pretty messy activity, so I recommend you plan things out first.)
2. Make sure your piece of paper is smaller than the baking tray.
3. Spray your shaving cream into the baking tray. Use your hands to smooth it around so that you have a nice even layer.
4. Add in random lines of craft paint. (We chose reds and yellow, but you could do all sorts of colors if you want.)
5. Use your fingers to swirl the paint around. (Note- You don't want a big blob of color. It looks prettier with swirls).
6. Place your paper into the tray so that it comes in contact with the shaving cream/ paint mixture. Lift the paper up. Wipe the excess shaving cream off the sheet with your ruler/ unused credit card. Don't let the shaving cream sit too long on the paper, otherwise your paper may get soaked and rip.
(Isn't it neat? Any parts of the paper that came in contact with the shaving cream will remain white while the parts that came in contact with the paint will get colored.)
7. Let your beautiful sheets dry. (Added bonus: They'll smell shaving cream sweet.)
(Sorry I didn't take any photos of the process. Chuck and I had fun doing the activity, but I had to keep a close eye on him so that he wouldn't eat the shaving cream.... or wipe it on himself or our couch.)
Update: I ended up making Chinese New Year envelopes out of the paper. They're unexpected, thrifty, and lovely.
Subscribe to:
Posts (Atom)