Make Homeamde Felt Milk Jug Cap Ornaments

Each year I try to make a couple of handmade ornaments for our tree.  Last year, Chuck and I made these hand and feet salt dough ornaments.  I would have made him a new set this year... but his feet are so big that the ornaments would end up being the size of small plates.

So instead, this year I turned a bunch of milk jug caps (gifted to me by a craft-loving aunt- thanks!) to make these mini felt ornaments.  Each one has a different design and they came out so colorful and cute.... I just want to eat them up.   But don't worry, I won't because they're made of felt...and glue...and plastic...

Can you guess which one is Chuck's favorite?  Keep on reading to find out... 

DIY Mini Plaster of Paris Christmas Village

I've always loved Christmas.  It's the time of year when twinkly lights decorate the dark nighttime sky.  And, it's the time of year that I'm reminded to hope because of God's great love for us.

Nowadays, Chuck and I love looking at the miniature Christmas village on display at our local craft store.  We always walk around oohing and ahhing over the little houses, ferris wheel, and tiny dog playing in snow.  It's magical.

So that's why I made us our own miniature Christmas village out of materials that we had lying around our apartment.

Let's Make a DIY Mini Christmas Village!

This post contains affiliate links.  Thank you for your support!

(Psst- Click here to see see how I made the pipe cleaner and cardboard trees.)

Two Toddler approved Fall Crafts

Even though I really enjoy crafting, sometimes it takes a bit of persuasion to get Chuck to join in.  Currently he's much more into playing with toy cars than crafting with mom.  Go figure! :)  But I'm a persistent bugger, so I keep encouraging him to make stuff with me.

So far several of my craft plans flopped, but here are two crafts that Chuck actually participated in. (Hooray!) 

1.  Paper Bag Pumpkins:

Materials:

• Lunch bags
• Tissue paper squares
• Glue stick
• Marker 
• Googly eyes (optional)
• Pipe Cleaner
• Newspaper

Directions:

1. Glue your tissue paper squares onto your lunch bag.
2. Add a face
3. Crumple up newspapers and stick them into your bag.
4. Use a pipe cleaner to seal up the bag.

And here are some pumpkins made during our toddler craft time:

2.  Contact Paper Leaves
 

Materials:

•  Leaves
• Contact paper
• Scissors
• Tape
• Tissue paper (optional)

Directions:

1. Place leaves in a heavy book to flatten them.
2. Tape down contact paper, sticky side up.
3. Stick leaves and tissue paper squares onto your contact paper.
4. Place a piece of contact paper(sticky side down) on top of your first piece of contact paper.
5. Trim the edges and tape your leaves onto a window.

Have a great weekend!

Cardboard Spaceship Climbing Toy

Currently Chuck and I have been reading books about the moon and space travel.  He loves the Berenstein Bears "On the Moon" book and Eric Carle's "Papa, please get the moon for me." 

So with that in mind, I made him a little cardboard spaceship climbing toy.  I found some lovely examples online and one of the mommies in our toddler group made a very simple version out of paper.  So, I based my design off of these.        

To operate the toy, you simply attach the moon to the wall or a doorknob.  Then, you pull the two brown tabs apart and your spaceship shoots straight to the moon.

Materials:

• Cardboard box
• Scissors
• String
• Paint and paint brushes
• Mod Podge and brush (to protect your paint job)
• Packing tape
• Straw 

Directions:
This was a really quick and simple toy to make.
1.  Cut out your spaceship, moon, and two small rectangular stopper pieces out of cardboard.
2.  Paint your spaceship and moon.
3.  Once the paint dries, protect your paint job with Mod Podge.
4.  Cut your straw in half.  Tape it to the back of your spaceship.
5.  Fold your long piece of string in half.  Tape the middle of the string to the back of your moon.  Then, string your two strands through the two straws.  Tape the ends of  string to your cardboard rectangles so that the spaceship doesn't fall off.

Here's a shot of the mechanics: 

And that's it.  Simple to make, and simple to use.  You don't even have to make a spaceship and a rocket.  What about an alien spaceship and earth?  Or a basketball player and a basket?  The possibilities are endless.

We went this route, and Chuck got a kick out of sending his cardboard rocket to the moon.


Cardboard Rocket Ship sent to the moon from Pink Stripey Socks on Vimeo.


And then, since I was working with cardboard already.... I figured I'd make Chuck some cardboard food as well.  All that flying sure gives an astronaut a hearty appetite. 

Have a wonderful weekend!  See you back on Monday.


Psst-  If you've got a ton of cardboard lying around... check out these fun kids' crafts that use cardboard:

• Cardboard and Styrofoam Picture Frame
• Cardboard Camera
• Cardboard taxi bank
• Cardboard rattle-drum 
• Cardboard guitar 
• Cereal Box elephant
• Cereal Box giraffe

Spiked and Braided T-shirt Bracelet

I can't believe that September is just a week away.  Eeek!  Is it just me, or does every store sign seem to scream "Back to School?"

Growing up, I loved this time of the year for two reasons.  1)  I loved school. (Yeah, nerds!) and  2)  I loved back to school shopping.  New blank notebooks?  Swoon.   New clothes and shoes?  Double swoon. (Was anyone else like this as a kid?)

But, buying a ton of new items gets costly quite quickly. 

Fueled by my thrifty nature, I made these spiked and braided t-shirt bracelets.  They came out pretty cute. I like to imagine some creative, quirky gal wearing them to the first day of school. 

The colors are quite girly, but the spikes show that you've got some spunk!

Materials:

• Multicolored T-shirt
• Fabric scissors
• Spikes with screwbacks
• Pen (Optional)
• Needle and thread
• Tacky Glue

Make a sailboat out of a shampoo bottle

((Thank you to everyone for entering my Kiwi Crate Giveaway.  Before I talk about today's crapt, let me just announce that the winner of the giveaway is Mel!  Congratulations!  Please email me your mailing address so I can send you a Kiwi Crate straight away.))

Hi everyone!  Today I'm going to share how I made this shampoo bottle sailboat after being inspired by this DIY boat kit found here:

Materials:
- empty shampoo bottle <-- crap!
- 2 rubber bands
- wine cork <-- crap!
- drill
- stirrer <-- crap!
- straw <-- crap!
- pair of scissors
- triangle from a potato chip bag <-- crap!
- tape (packing tape is best, but I only had clear plastic tape)

Here are the boat's main components:

Directions:
1.  Cut your cork in half lengthwise.  Then, drill a hole through the middle.  The hole should be big enough to hold your stirrer (aka the mast) up.

2.  Your straw is going to be the horizontal bar holding up your sail (aka, the boom).  Cut your straw to the desired length.  Then, make two triangle cutouts on each side of the straw, so that your stirrer (aka the mast) can slide into the straw.  Both your stirrer and straw will support your plastic bag sail.  

3.  Cut your plastic chip bag into a triangle sail shape.  Tape the plastic bag onto your stirrer and straw to create a sail.



4.  Use two rubber bands to attach your cork to your shampoo bottle.  Then, stick your stirrer into the cork's hole and voila, instant sail boat.

The boat sails nicely in your bathtub, but Chuck and I took it one step further and sailed the high seas (eh hem... a nearby lake.)  We just tied a ribbon to it so that it wouldn't float away.

Hope you and your little one enjoy this crapt!

String art thread and milk jug necklace

Spring is here!

I love feeling the warmer temperatures and seeing the trees bursting with delicate pink and white blooms.  And I don't know about you, but I can't wait to exchange my dark, winter wardrobe for a lighter, more colorful one.

Inspired by the warmer weather and this gorgeous necklace from Modcloth, I welcomed the new season by crapting a wearable, string art necklace out of two materials:  a milk jug and embroidery thread. 

Materials:
- empty milk jug, cleaned and dried
- scissors
- hole puncher
- 2 colors of embroidery thread
- Sharpie marker

Kids' Cheesy Cardboard Camera

Hi everoyne!  

Happy belated Earth Day!

 Today I'll share about how I made this cheesy cardboard camera for Chuck.   This crapt was inspired by his love for eating cheese and touching my camera.  Here's what the camera looks like from the front:

 And here's what it looks like from the back:

Materials:

- small metal cylinder container with lid (or you could probably use a paper towel roll)

- can opener

- small, sturdy cardboard box

- craft knife

- scissors

- self-healing mat

- drill

- pencil

- 3 caps (I used 3 baby food squeeze pack caps)

- 3 brass fasteners

- packing tape

- lanyard (or string)

- disposable baking sheet (or plastic container lid or heavy duty aluminum foil)

- glue

- craft paint

- paint brushes and foam brush

- Mod Podge

Directions:
1.  I used a can opener to remove the bottom of my small, cylinder container.  I made sure that the can opener made clean cuts so that I wouldn't cut Chuck's fingers.  This cylinder became my camera "lens."

2.   The photo below shows my original box.  It was initially too big, so I chopped off a couple of inches off the right side of the box.  I used the cut off bits to fashion a top for the camera.

 3.  I cut out two circles, one in the front and one in the back of my camera.  The circle in the front was the same size as my cylinder.  (I just traced the cylinder and then cut the circle out.) The circle in the back of the box was slightly smaller than my cylinder.  (This ensured that my lens would poke out through the front, but not slide out through the back.)

4.  I also cut a rectangle from in the top, right hand corner of the front of my camera.  This became my "flash."

5.  Hubby drilled five holes in my cardboard:
- Two holes in the back to insert my back red knobs
- One hole on my top piece to insert my top green knob
- A hole on each side of the camera to string my lanyard strap through the body

He also drilled a hole into each of my three caps.  All the holes had to be big enough so that a fastener could fit through them.

 Here's a photo showing how the pieces fit together on the inside.  (I didn't use fasteners on the sides of my camera. I just poked them through the holes to show you where the holes were)

Here's how the camera  looked like with the top piece on:

I took this photo before cutting out the rectangle hole for the flash.

6.  After making sure my camera parts fit together, it was time to paint.  I gave the cardboard parts and cylinder two coats of yellow craft paint.  I also painted on my grey circles.

 7. Once the paint dried, I attached my "knobs", "lens", and "flash."  I used the brass fasteners to fasten the knobs onto the cardboard pieces.   I cut out a rectangle from my disposable baking pan and taped it over my rectangular "flash" hole.  I used a lot of packing tape to attach my cylinder to the inside of my camera.

8. I touched up my paint job a bit. Then, I coated my camera with Mod Podge to protect the paint.

9.  I strung lanyard through the body of the camera and then used glue and packing tape to attach the top piece to the body.

10.  To further protect my paint job, I ended up putting a thin strip of packing tape on the edges of the camera. (I've noticed that paint chips off the edges first, so I made sure to protect those with tape.)  I also put some tape near the lanyard hole in case the weight of the camera pulled on the lanyard and ripped the cardboard.

Phew.  Once I was done, I couldn't help but smile a cheesy grin.  (Hee hee.)  Here are some photos of Chuck playing around with his new cardboard camera.

Say "Cheese!"

Thanks for joining me on another crapty adventure.  If you're interested in making other crapty cardboard toys, check out my cardboard guitar, cardboard rattle drum, cereal box elephant, or cereal box giraffe.

Easter egg crafts

Hi everyone!

I hope you had an egg-cellent Easter.
We had a really nice time eating and celebrating with our egg-stended family.
I think I went a bit overboard with this Easter's egg-related crafts:

Inspired by Krokotak's egg carton hens, I made my own chicken and ladybug egg holders.

I also blew out a bunch of eggs, colored them, and then turned them into confetti eggs for our family Easter egg hunt.

Blowing out the eggs:  
I used a safety pin and pricked the top and bottom of the egg.  Then, I used the safety pin to enlarge the bottom hole.  Then, I placed my mouth over the smaller top hole and blew the egg out over a bowl.  Once the egg was emptied, I rinsed the shell out and left it to dry on a paper towel.

Marbleizing eggs with nail polish:
Once the eggs were hollowed out, my sister and I marbleized some of the eggs using Camille Styles' instructions.  (Note:  Her eggs came out beautifully!  As you can see, I had a lot of trouble getting even results. Maybe it's because my nail polish was the cheap 2 dollar kind... or too old?  Or, perhaps my water wasn't the right temperature?  Hrmm...  Did anyone else have trouble making these eggs?)

Designing with masking tape  and dying eggs:
I had much better luck dying the rest of my eggs.  Hubby and I used masking tape to first create designs and then we dyed them.  To create each color, we simply combined 1 cup of boiling water, 20 drops of food coloring, and 2 teaspoons of vinegar in a large mug.  Then, we held our eggs in the dye until they took on the hue that we liked.

Filling the confetti eggs:
Once all the dye dried (and the nail polish smell dissipated... yuck), I filled the hollowed out eggs with  rice krispy treats (poured through a simple funnel made from rolling a piece of paper) and sealed up the holes with masking tape.

The kids had fun finding these special eggs and stomping on them to reveal the rice krispies within.

Although these eggs were fun to make, it was even more fun to see the kids smile each time they found a special "stomping egg."

Happy Monday!

St. Patrick's day photo props

Today our toddler time is holding a St. Patrick's day event for the kids.  Here are two photo props that I crapted for the event:

Both props were made out of old cereal boxes. The kids are supposed to stick their faces through the hole in the left prop and they're supposed to stand underneath the hat on the right.

Please send some good Irish luck our way.  I'm hoping that the kids will use the props and we get some super cute and silly photos.

Happy St. Patrick's Day!

Make an eggshell mosaic pendant

Don't toss out your eggshells!  Today's craft shows a really unique way to turn them into beautiful pieces of art!

I love vintage micro mosaic jewelry, but being a huge cheap-o, I never allow myself to buy it.  So, yesterday, armed with a bunch of eggshells and milk jug caps (thanks Tita Tina for the stash!), I made my own version of micro mosaic jewelry.  Here are my two finished pendants:

Eggshell Mosaic Pendants

What a lovely piece of crapt

This post contains affiliate links. Thank you for your support! 

Make a rattle-drum

Chinese New Year is quickly approaching.  To help get us in the mood, I made this rattle-drum for Baby Chuck using directions I found in a book of crafts. Do you like the black and white?  I chose those two colors to give it a modern look.

DIY Musical Instrument:  Cardboard Rattle-drum

Wanna make your own?  Here's how I did it.

Crapty DIY galaxy light jar

You know how there are TONS and TONS of beautiful craft posts floating around online?

Well, this isn't one of them.

This week's crapt is a DIY galaxy light jar... and it came out looking a tad... crapty.

Don't get me wrong,  making this galaxy light jar would be a really fun activity to do with a young child.  And if you squint your eyes and tilt your head just so... the jar and lights do sort of resemble the night sky.  But, sadly mine just didn't turn out as cool looking as the one from this Design Mom post.  Perhaps I needed a stronger LED light?  Or a jar with a wider mouth?  Hmm....

Anyway, if you love the night sky, or if you have a child that loves staring at the stars and space, maybe you'd like to make one of these? Here's what you'll need:

Materials:
- scissors
- tape
- skewer
- 1 small LED light (I just used our bicycle light)
- jar (with opening large enough to fit your light)
- disposable cake tin <-- crap!

Directions:
(1)  Smooth out your cake tin (I just rubbed the scissor's handles against the metal to flatten out the ridges)

(2)  Cut out a rectangle from your cake tin.  Make sure that it's tall as your jar (it reaches from the bottom all the way to the lid)

(3)  Trace the bottom of your jar onto the cake tin and cut the circle out.

(4)  Use a skewer to punch a bunch of holes into your rectangle and circle.  (You want to see lots of starry light, so you'll need to punch a loooot of holes.)

(5)  Tape your metal circle to the bottom of the jar

(6)  Roll your rectangle into a cylinder.  Tape the cylinder so it keeps its shape.  Squeeze your cylinder into your jar.

Yup.  It's looking crapty already....

(7)  Turn on your LED light and drop it in the jar. (Make sure the light faces the bottom of the jar.)  Screw on the lid.

(8)  Turn off the lights in your room. Orient the jar so that it's resting on the lid.  Enjoy your very own mini galaxy.

Crapty origami boat ornaments and Christmas crackers

This weekend we're hosting a gingerbread house party.  To prepare, I purchased a whole bunch of candy, graham crackers, and icing.   I also crapted a couple of origami boat ornaments.  They were folded from magazine paper.  My little boats were inspired by this origami boat necklace that I won in a recent blog giveaway.  (First time I won one of these giveaways, hooray!)

I also made a bunch of psuedo Christmas crackers out of my ever growing pile of paper towel rolls.  Each guest is going to take one home as a gift.  Inside the cracker they'll find a balloon, a corny Christmas joke, a snowflake, cute band-aids  and a couple of candies.  I think traditional crackers are supposed to pop, but I couldn't find the cracker snaps, so mine will just look cute.  

Hope you have a great weekend.  See you on Monday!

Crapty Fridays- DIY cardboard roll kaleidoscope

Last night I finally succeeded in crapting a cardboard roll kaleidoscope.  Yes!

Please excuse me while I do a happy dance.










My crapting dreams finally came true.  This was actually my fifth attempt at making a kaleidoscope. Yup, I tried four previous iterations and failed miserably.  So here's a big virtual thank you to Genuine Mudpie for her beautifully detailed and photographed set of directions.

Thank you!

DIY Egg carton wreath

Hi everyone.  Did you vote yesterday?  I took Baby Chuck into the voting booth.  He wasn't too sure about the candidates, but he was very excited about pushing the buttons.

As I sit here and watch the results coming out on tv, I thought I would post my adventures crapting this egg carton wreath.  Since this DIY involves crap (egg carton), it technically should be posted on Friday.  But, I was so happy with how it turned out that I just couldn't wait.  (I also took a bunch of photos of the flowers for my blog facelift.  Do you like it?)

I think this is my favorite crapt so far.  It's pretty, cheery, and colorful.  It's also super easy to make.

Materials:
- egg carton (<--crap)
- cereal box
- craft paint
- paintbrushes
- hot glue gun (or possibly any other strong glue)
- scissors

Directions:

Step 1:  Get yourself an egg carton.

Step 2:  Cut the lid up into leaves.

Step 3:  Cut the egg cups up into different flower shapes.

RIP Egg carton- This is all that's left

Step 4: Cut out a ring from a cereal box (I traced a bowl and plate to create the ring)

Step 5:  Paint and let everything dry (I also doodled "hello," cut it out, and painted it)

Step 6:  Glue everything onto the wreath (I glued the leaves first, then the "hello," then the big flowers, and then the small flowers)

Happy Wednesday!

 Let's keep in Contact!

Like kids crafts and activities?  Then you'll definitely want to check out this awesome craft ebook!  It contains 115 pages of unique crafts written by 18 kid craft loving moms!  And, it costs only $12.99!

   

And, you can always find  fun ideas on my Pinterest, Facebook, Instagram, or Twitter accounts!  (Or subscribe to my email mailing list by filling out the pink bar at the top of your screen.)

Happy making, friends!